IR FAST MEDIUM WAVE QUARTZ EMITTER

The IR Fast Medium Wave emitter, is the optimal compromise when one specific application requires at the same time the IR radiation of the Medium Wave emitters and the fast response time in the switching on/off of the Short Wave emitters.

The main characteristics of IR Fast Medium Wave Emitters are:

  • Twin tube standard section: 18 x 8 mm – 23 x11 mm – 34 x15 mm

  • Radiation peak in the range of 1,4 – 1,6µm

  • 50 W/cm maximum density of nominal power (to be verified in prototype phase)

  • 130 kW/m2 maximum surface power density

  • Horizontal working position but on request special Vertical orientation designs are possible.

  • Possibility to apply a reflector directly on the quartz tube, to better convey and focus all the energy emitted on the material.

Helios Quartz can design the right IR emitter with the peak radiation wavelength matching the optimal absorption curve of the material to be heated; this allows you to obtain the most efficient heating process with less energy consumption.

Dis_Fast Medium_Wave_double_tube

Department can design twin tube IR emitters with different filament configurations. This allows extraordinary flexibility both in terms of heated area modularity and lead wire position. The picture below represents some of the most common filament configuration

Helios Quartz can also provide single tube IR Fast Medium Wave emitters, in the following configurations:

Dis_Fast Medium_Wave_single_tube